doc. no : qw0905- rev. : date : data sheet LSR3330-PF ligitek electronics co.,ltd. property of ligitek only 01 - jun. - 2007 LSR3330-PF b pb lead-free parts super bright round type led lamps
ligitek electronics co.,ltd. property of ligitek only 1/5 page 5.9 5.0 part no.LSR3330-PF package dimensions 1.5max 0.5 typ 25.0min - + 2.54typ 1.0min directivity radiation note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. 8.6 7.6
red diffused color lens gaalas material LSR3330-PF part no red emitted 150 luminous intensity @20ma(mcd) typ. 20 spectral halfwidth nm 660 peak wave length pnm 2.4 max. forward voltage @ ma(v) 1.5 min. 20 90 min. viewing angle 2 1/2 (deg) 28 2/5 page ligitek electronics co.,ltd. property of ligitek only unit ma ma a mw 30 100 sr ratings 10 ir -40 ~ +85 -40 ~ +100 100 forward current peak forward current duty 1/10@10khz parameter operating temperature storage temperature reverse current @5v power dissipation typical electrical & optical characteristics (ta=25 ) symbol t opr tstg i f pd i fp absolute maximum ratings at ta=25 note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. LSR3330-PF part no.
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( ) r e l a t i v e i n t e n s i t y @ 2 0 m a wavelength (nm) f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 fig.4 relative intensity vs. temperature ambient temperature( ) r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 typical electro-optical characteristics curve forward voltage(v) fig.1 forward current vs. forward voltage f o r w a r d c u r r e n t ( m a ) forward current(ma) fig.2 relative intensity vs. forward current r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0101001000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40-200204060 1.0 1.1 1.2 600650700750 0.0 0.5 1.0 2.03.04.05.0 80100 0.8 0.9 -20 -4040 20 080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 sr chip page 3/5 LSR3330-PF part no.
LSR3330-PF part no. 60 seconds max dip soldering preheat: 120 c max preheat time: 60seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 5 /sec max note:1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. 0 0 25 120 preheat 50 100 2 /sec max temp( c) 260 260 c3sec max time(sec) 150 ligitek electronics co.,ltd. property of ligitek only soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time only) distance:2mm min(from solder joint to body) 2.wave soldering profile page 4/5
LSR3330-PF part no. page 5/5 reference standard mil-std-883:1008 jis c 7021: b-10 jis c 7021: b-12 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 test itemtest condition operating life test reliability test: 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) low temperature storage test 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) high temperature storage test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. description ligitek electronics co.,ltd. property of ligitek only mil-std-202:103b jis c 7021: b-11 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 solder resistance test 1.t.sol=260 5 2.dwell time= 10 1sec. 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles thermal shock test high temperature high humidity test solderability test 1.t.sol=230 5 2.dwell time=5 1sec this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. this test intended to see soldering well performed or not. the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. the purpose of this test is the resistance of the device under tropical for hours. 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs
|
